Products for workshops and special tools The characteristics of the transmission fluid being used in an automatic gearbox deteriorate after a certain period of time. Not changing it on time causes a function change of the transmission fluid and affects the transmission characteristic...

Automatic device for filling of air conditioning systems for hybrid vehicles for which the manufacturer prescribes the use of R134a. Suit for: Hybrid car Refrigerant: R134a Mode: Fully-automatic Screen: LCD Specifications: Recovery speed: 180~350 G/min Recharge speed: 800~1500 G/min Vac...

Specifications: Function: collect waste oil from vehicle gear box or engine Power: compressed air Air Consumption: 52 Gallons/min (200L/min.) Air Inlet Pressure(vacuum) 87~116Psi/6~8Bar Air Inlet Pressure (Oil ejection pressure) 10~14PSI/0.7~1Bar Vacuum Degree 0~-14Psi/0~-1Bar Tank Capacit...

Features: - Fluid exchange can be done in 20 mins and exchanging speed is adjustable. - Automatic shut off when the new fluid volume reaches a minimum fluid level with a warning signal. - The tool case can be laid down to become an umbrella for the buttons and the meter during shipping. -...

Industrial hose reel Inlet/Outlet (inch) – 1/4’’ Max. pressure (psi/bar) – 218/15 Hose capacity (inch) – 1/4’’ Length (ft/m) – 50/15 Application – Air

Products for workshops and special tools. Automatic Transmission Fluid Oil Exchanger is designed to accomplish the replacement of transmission cooling oils as well as torque converter and transmission radiator fluids in the shortest time with an exchange rate of more than 90 %. The machin...

Specifications: Functions - Remove, clean, and replace fluid from most types and models of automatic gearboxes, transmissions, hydraulic torque transmissions, gearbox radiators and radiation pipelines. Power supply - 220 V, 50 HZ, 1PH Pump power - 250 W Oil Inlet and Return Hoses - 3-(2x)...

Mobile unit for collection of waste oil through the oil filler hole with a help of probe, as well as in a traditional way, through the oil drain with the help of funnel. Collected oil falls into a special container and is being disposed. Intake of oil is made by compressed air pressure of ...

Cylinder for CT4101 Altoelsammler (1 pc.) Instructions: - Air supply must be filtered of water and oil impurities before connecting to the bank. Air supply is to be 87 psi ~ 116 psi (6bar ~ 8bar) - Temperature of oil shouldn't be higher than 60 °C, oil temperature of 40-60 °C is suggeste...

Product Features: - Еnаblеs to select different modes through the intelligent operation panel; - The distinctive double wall tank design guarantees safe operations and cleverly warms the new coolant during exchange; - Protects the engine and pipelines in the cooling system; - Dual pumps se...

Product Features: - Exclusive Deeptrans technology enhances fluid exchange performance bу 50%. - Patented Double Wall Tank design let new fluid become warm which gives protection to transmission and pipelines. - The high precision scale marks allows more accurate result of calibration and ...

Mobile unit is suitable for dispensing oil for mobile application. Drum trolley ensures high mobility and efficiency. Easy to move the drum in the workshop. Mobile unit for 200kgs Drum Standard model composed of grease pump, trolley, grease gun with z-swivel and connection hose. Product...

This 9 litres transfer pump is suitable for filling of nearly all liquids. Suitable for all oils, antifreeze, water etc. Thanks to the chemical resistance, the non-corrosiveness and the temperature resistance of the HDPE construction this pump is also suitable for use in the industrial sec...

Features: - A large 9.0 L capacity - Manual fluid extractor can be used to extract many kinds of non-explosive liquids. - Completely using hand pump when you without shop air. - New safety design. when the tank is full of liquid, the vacuum will be shut off automatically. - Fast, clean an...

Durable chemical resistant 3L sprayer, especially suitable for professional cleaning with aggressive solvents in hard to reach areas. Seals and lines are resistant to all common cleaning agents, solvents, petrol and oils. - 3 liter container made of robust cold-rolled stainless steel - Me...

Professional stationary pneumatic oil pump for Workshops incl. compressor, tubes, tube coil.

Two-piece telescopic tube suitable for drums up to 208 L. Pumps water-based liquids, antifreeze and all oil-based liquids as well as other non-corrosive liquids. Pumps approximately 0.3 L of liquid in a single run. Galvanized for durability. Has soft vinyl handle. Suitable for barrel heigh...

AH-02 Compressor Air Hose PU 10 m is a spiral compressor hose of 10 m length, designed for supplying air tools with compressed air. The hose is made of polyurethane and it is resistant to wear, tear as well as fire. The coupling is easily released and ensures a quick and comfortable connec...

Two-piece telescopic tube suitable for drums up to 208 L. Pumps water-based liquids, antifreeze and all oil-based liquids as well as other non-corrosive liquids. Pumps approximately 0.3 L of liquid in a single run. Galvanized for durability. Has soft vinyl handle. Suitable for barrel heigh...

Suitable for these products: CT4105, CT4104, CT4103, CT4112

Suitable for sump plugs on engine, gearbox and back axle. 3/8" hex - 5/16" square; 8 mm hex - 3/8" square; 9 mm hex - 11 mm square; 10 mm hex - 13 mm square; 12 mm hex - 17 mm square; 14 mm hex - 16 mm lenght tommy bar

Aluminum Oil Filter Cup Wrench Set includes(23 pcs): 1x 65 mm; 1x 67 mm; 2x 73 mm; 5x 74 mm; 2x 75 mm; 1x 76 mm; 1x 79 mm; 1x 79.5 mm; 1x 84 mm; 1x 89 mm; 1x 90 mm; 1x 91 mm; 1x 92 mm; 1x 95 mm; 1x 101 mm; 1/2" Dr. Ratchet Handle; 12 Point 22 mm wrench

9 pc Oil Filter Wrench Set includes: 2x 14 Flutes - 64,5 mm; 1x 15 Flutes - 88,2 mm; 1x 16 Flutes - 74,2 mm; 1x Hex - 27 mm; 1x Hex - 32 mm; 1x Hex - 36 mm; 1x Adjustable Grip Socket: workable range 63-83 mm

Universal oil filter wrench for 80-115 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2'' drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality recommended ...

Universal oil filter wrench for 110-140 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2'' drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality r...

Universal oil filter wrench for Spin-On Filters with diameter 51-111 mm.

Oil Filter Wrench Set (15 pcs). HC - 74/76 mm - 15 flutes - 2 step HC - 74/76 mm - 14 flutes - 2 step HC - 93 mm - 15 flutes - 1 step HC - 65/67 mm - 14 flutes - 2 step HC - 73 mm - 14 flutes - 1 step HC - 80 mm - 15 flutes - 1 step HC - 68 mm - 14 flutes - 1 step HC - 93 mm - 36 flutes - ...

Protective cover for fenders with magnetic closure and MANNOL logo. Designed to protect the front fender of cars during repair and maintenance work in the engine compartment while the bonnet is open. Protects the fender of the vehicle against scratches, oil as well as dirt and increases th...

Size: Length- 86,5 cm, width 39 cm, Height- 9,5 cm.

Oil collector for collecting waste oil of vehicles with an integrated funnel and practical large handles. Ideal for easier and cleaner oil changes. Product Characteristics: Characteristics Method Unit Value Capacity L 15 Colour black Diameter cm 46 (18'') Height cm 15 (6'') Material 100 ...

Oil drain pan used to collect old oil from vehicles for an easier and cleaner oil change. Product Characteristics: Characteristics: Capacity - 7 L Colour - black Diameter - 34 cm Height - 10 cm Material - polypropylene

Tool for leak testing/inspection of auto oil filters. Adapter measurements: 1-12UNF; 3/4-16UNF; 11/8-16UNF; 13/16-16UNF M12x1.5; M16x1.5; M18X1.5; M30x1.5; M22x1.5

Grease gun for grease dosing from 400 g grease cartridges. High-quality design with galvanized grease tank, ergonomically shaped handle and two 300 mm safety reinforced rubber hoses. with galvanized grease tank, ergonomically shaped handle and 2 x 300 mm safety reinforced rubber hoses. Pu...

The innovative Dispensing Taps for 20 L MANNOL containers and 1,000 L IBC containers enable easy, clean and fast dispensing of liquids without clucking. Thanks to the patented ventilation system, the Dispensing Tap offers a very high discharge capacity with a flow rate of > 10 L/min. Di...

A flexible tube is a pumping device for engine oils and technical fluids that screws onto the container opening and allows the contents to flow quickly, safely and easily to their destination. Suitable for MANNOL 20 L canisters.

Pump/Soap Dispenser for accurate and makes your soap last longer - Compatible with hand wash paste Auto Master 9957 5 liter - Also suitable for other container with a diameter of 40 mm screw thread - Handy pump dispenser.

Dispensing Tap for 60 and 200 Liter containers and drums are perfectly suitable for simple, clean and quick refilling of fluids without gurgling. Dispensing Tap are leak proof even with aggressive chemical compounds and strongly creeping fluids.

Flexible funnel for 10 liter canisters for motor oils and technical liquids. The funnel is screwed onto the neck of the canister, which prevents unnecessary leakage of liquid during transfusion.

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40 °F to 185 °F (-40 °C to 80 °C). Heat stabilized from -40 °F to 221 °F (-40 °C to 105 °C)...

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40 °F to 185 °F (-40 °C to 80 °C). Heat stabilized from -40 °F to 221 °F (-40 °C to 105 °C)...

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40 °F to 185 °F (-40 °C to 80 °C). Heat stabilized from -40 °F to 221 °F (-40 °C to 105 °C)...

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40 °F to 185 °F (-40 °C to 80 °C). Heat stabilized from -40 °F to 221 °F (-40 °C to 105 °C)...

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40 °F to 185 °F (-40 °C to 80 °C). Heat stabilized from -40 °F to 221 °F (-40 °C to 105 °C)...

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40 °F to 185 °F (-40 °C to 80 °C). Heat stabilized from -40 °F to 221 °F (-40 °C to 105 °C)...

Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40 °F to 185 °F (-40 °C to 80 °C). Heat stabilized from -40 °F to 221 °F (-40 °C to 105 °C)....

Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...

Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...

Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...

Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...

Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...

Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...